Positioning and erecting of the ladder, Multi ladder, 3 parts, Multi ladder, premium, 3 parts – Brennenstuhl Aluminium Double-Sided Stepladder special trade quality 2x2 rungs Height of stepladder 0,7m User Manual
Page 18
18
GB
Positioning and erecting of the ladder
Standing possibilities:
q
Multi ladder, 3 parts
b
c
d
65°-75°
a
Standing possibilities:
Straight ladder:
i
Mount the cross foot
6
(see Fig.
d
).
i
Make sure that the rung hooks
12
and the
lifting lock
13
are engaged.
NOTE: An angle of 65° to 75° to the
horizontal must be kept (see Fig.
a
).
Stepladder:
i
Mount the cross foot
6
(see Fig.
d
).
i
Lift both sliding parts and spread them.
i
Insert the two upper retaining pins (see Fig.
b
)
into the hinge stop slots.
i
Open the ladder until the holding belts are
pulled tight (see Fig.
c
).
q
Multi ladder, Premium, 3 parts
b
65°-75°
a
c
e
f
g
d
Straight ladder:
i
Make sure that the rung hooks
12
and the
lifting lock
13
are engaged.
NOTE: An angle of 65° to 75° to the
horizontal must be kept (see Fig.
a
).
Stepladder:
i
Lift both sliding parts and spread them.
i
Insert the two upper retaining pins (see Fig.
b
)
into the hinge stop slots.
i
Open the ladder until the holding belts are
pulled tight (see Fig.
c
).
i
Bolt the side cross bar to the supporting part
(see Fig.
d
).
Stepladder with attached extension
ladder up:
i
Bolt the side cross bar to the supporting part
(see Fig.
d
).
NOTE: When the sliding part is extended, at
least 3 rungs must overlap.
Leitern_Content_DE_GB_FR_NL_IT.indd 18
23.07.14 13:44