2 linking chargers together, Figure 7 – Casella CEL CEL-35X dBadge User Manual
Page 12
![background image](/files/767539/content/doc012.png)
Casella CEL-35X dBadge Users Handbook – Page 12
Note that once removed from the charger, the dBadge will
automatically switch off. If returned to the charger the CEL-35X will
charge for a minimum time of 10 minutes regardless of whether it is
fully charged. This does not affect battery performance in any way. If
the battery is fully discharged prior to being placed on a charger, the
CEL-35X will be trickle charged for a short time prior to the fast charge
cycle, this prevents damage to the batteries. If this occurs a „Pre-
Charge‟ message will appear on the dBadge display.
4.2 Linking Chargers Together
The main CEL-6362 charger can be linked to the CEL-6363 charger
extension unit via the C6359/0.2 cable supplied with the CEL-6363.
Up to 3 CEL-6363 units can be linked to the CEL-6362 charger for
charging up to 12 dBadge units as shown in Figure 7 below.
Figure 7
CEL-6362 - 3 Way charger Kit
3 Way Charger + PC18 Power supply
CEL-6363 - Expansion charger kit
3 Way Charger + C6359/0.2 link cable.
PC18
Power supply
.....x4 CHARGER BASES
IN TOTAL