COMMELL FS-A76 - Manual (Page 17)

FS-A76 User’s Manual
- 15 -
2.4.2 <Memory installation>
FS-A76 has two 240-pin DDR3 DIMM support up to 16GB of memory capacity. The
memory frequency supports 1066/1333 MHz. Only Non-ECC memory is supported.
2.5 <CMOS Setup>
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due
to inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS
to its default values.
Jumper: JRTC
Type: Onboard 3-pin jumper
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting: 2-3
DDRIIIA&B
JRTC
1 3