COMMELL FS-97A - Manual (Page 27)

FS-97A User’s Manual Hardware Setup
Display Interface 27
LCD installing guide:
1. Prepare a panel, inverter and FS-97A.
2. Please check the datasheet of the panel to see the voltage of the panel, and set the
jumper JVLCD to +5V or +3.3V.
3. Prepare a LVDS type LCD cable
4. Connect all the devices well.
FS-97A SBC
LCD panel
Inverter
Panel side Board side
For sample illustrator only
To CN_INV
To CN_LVDS