COMMELL HS-770E - Manual (Page 21)

HS-770(E) User’s Manual Enhanced IDE Interface
21
2.6 <Enhanced IDE Interface>
The board has one UltraDMA33 IDE interface to support up to 2 ATAPI devices, and one
CompactFlash Type II socket on the solder side, with jumper JCFSEL for IDE
master/slave mode selection.
Jumper: JCFSEL
Type: onboard 3-pin header
JCFSEL Mode
1-2 Master
2-3
Slave
Default setting
2.7 <Serial ATA Interface>
Based on Intel ICH6-M, the board provides two Serial ATA interfaces with up to 150MB/s
of transfer rate.
SATA1
SATA2
1 3
JCFSEL