COMMELL LE-575 - Manual (Page 19)

LE-575 User’s Manual
19
2.6 <Enhanced IDE & CF Interface>
The board supports one enhanced IDE interface for 2 ATAPI devices with ATA33. Based on
embedded application, the board has one 44-pin IDE connector +5V supported for disk on
module.
The board also provides a Compact Flash Type II socket with jumper (JCFSEL) selectable
Master/Slave mode on IDE channel.
Jumper: JCFSEL
Type: onboard 3-pin header
JCFSEL Mode
1-2 Master
2-3
Slave
Default setting
JCFSEL
3 1
1
2 44
43 IDE