COMMELL LS-572 - Manual (Page 25)

LS-572 User’s Manual
-23-
2.9 <Onboard Display Interface>
Based on Intel Q35 chipset with built-in graphics, the board provides one DB15
connector on real internal I/O port, and one 40-pin LVDS interface with 5-pin LCD
backlight inverter connector. (LS-572X Only)
The board also provides 26-pin DVI interface. (LS-572D Only )
Notice: When you install any PCI Graphic card, the onboard graphics would be disabled
automatically.
2.9.1 <Analog Display>
Please connect your CRT or LCD monitor with DB15 male connector to the onboard
DB15 female connector on rear I/O port.
2.9.2 <LVDS Display LS-572X Only >
The board provides one 40-pin LVDS connector for 18/24-bit dual channel panels,
supports up to 1600 x 1200 (UXGA) of resolution, with one LCD backlight inverter
connector and one jumper for panel voltage setting.
5 1
CN_INV
CN_LVDS
40
39
2
1
JVLCD