COMMELL LS-571 - Manual (Page 20)

LS-571 User’s Manual
- 19 -
2.6 <Enhanced IDE Interface>
The board has one Ultra 33 IDE interface to support up to 2 ATAPI devices, or one
ATAPI device and Compact Flash Type II socket on the solder side, with jumper
JCFSEL for IDE master/slave mode selection. And provide JVSSD jumper to
support +3.3V or +5V DOM selection.
Jumper: JCFSEL
Type: onboard 3-pin header
JCFSEL Mode
1-2 Master
2-3
Slave
Default setting: 2-3
Jumper: JVSSD
Type: onboard 3-pin header
JVSSD Mode
1-2 +5V
2-3 +3.3V
Default setting: 1-2
JCFSEL
1
3
JVSSD
1 3