COMMELL LS-570E - Manual (Page 20)

LS-570 User’s Manual Hardware Setup
Enhanced IDE&CF Interface 20
2.6 <Enhanced IDE & CF Interface>
The board has one Ultra DMA33 IDE interface to support up to 2 ATAPI devices, and one
Compact Flash Type II socket on the solder side.
The board also provides a Compact Flash Type II socket with jumper (JCFSEL) selectable
slave/Master mode on secondary IDE channel.
Jumper: JCFSEL
Type: onboard 3-pin header
JCFSEL Mode
1-2 Master
2-3
Slave
Default setting:2-3
JCFSEL
1
3
44
1
2
43
IDE