COMMELL LE-374 - Manual (Page 18)

LE-374 User’s Manual
- 16 -
JAT
2.5 <CMOS＆ATX Setup>
The board’s data of CMOS can be setting in BIOS. If the board refuses to boot due to
inappropriate CMOS settings, here is how to proceed to clear (reset) the CMOS to its
default values.
Jumper: JRTC
Type: Onboard 3-pin jumper
JRTC Mode
1-2 Clear CMOS
2-3 Normal Operation
Default setting
Jumper: JAT
Type: onboard 2-pin header
JAT Mode
Open ATX Mode
Short AT Mode
Default setting
JRTC
1
3