COMMELL LV-683 - Manual (Page 22)

LV-683 User’s Manual
- 21 -
To setup the LCD, you need the component below:
1. A panel with LVDS interfaces.
2. An inverter for panel’s backlight power.
3. A LCD cable and an inverter cable.
For the cables, please follow the pin assignment of the connector to make a cable, because
every panel has its own pin assignment, so we do not provide a standard cable; please find
a local cable manufacture to make cables.
LCD Installation Guide:
1. Preparing the LV-683, LCD panel and the backlight inverter
2. You would need a LVDS type cable.
3. To connect all of the devices well.
For sample illustrator only
Panel side Board side