COMMELL LV-677E - Manual (Page 20)

LV-677 User’s Manual
Enhanced IDE Interface 20
2.6 <Enhanced IDE Interface>
The board has one UltraDMA33 IDE interface to support up to 2 ATAPI devices, or one
ATAPI device and CompactFlash Type II socket on the solder side, with jumper JCFSEL
for IDE master/slave mode selection.
Jumper: JCFSEL
Type: onboard 3-pin header
JCFSEL Mode
1-2 Master
2-3
Slave
Default setting
2.7 <Serial ATA Interface>
Based on Intel ICH7-M, the board provides two Serial ATA interfaces with up to 150MB/s
of transfer rate.
JCFSEL
1
3