COMMELL LV-672 - Manual (Page 23)

LV-672 User’s Manual Hardware Setup
Audio Installation 23
2.10 <Audio Installation>
LV-672 integrated with REALTEK® ALC655 Codec for 5.1 channel sound output. It supports
16-bit stereo full-duplex with 48 KHz sampling rate, compliant with AC97 Rev.2.3
specifications.
The board has one phone jack on rear I/O panel for Line-out, Line-in, MIC(stereo)-in as
2-channel sound system, and Front, Rear, Center as 5.1-channel sound system. It also has
one 10-pin header for additional audio output, the cable with phone jack is optional
available.
For advanced configuration with system, please check the chapter of audio configuration.
CDIN
4
10
1
CN_AUDIO
1
Line-out Line-in MIC-in (system setup with 2-channel)
Front Rear Center (system setup with 5.1-channel)