COMMELL LV-671CM6 - Manual (Page 28)

LV-671Z User’s Manual Hardware Setup
Ethernet Interface 28
2.10 <Ethernet Interface>
The board integrates with Intel 82540EM Gigabit controller at the type of
10Base-T/100Base-TX/1000Base-T auto-switching Ethernet with full duplex and IEEE
802.3U compliant. The LAN function comes with a RJ45 jack on the rear I/O panel. The
CN_WOL is for the Wake-Up-On-LAN function link with PCI LAN Card.
Connector: CN_WOL
Type: onboard 3-pin (1 x 3) wafer connector
Pin 1 2 3
Description WOL-Ctrl Ground +5V Standby
Jumper: JLAN
Type: onboard 3-pin header
JRTC Mode
1-2 Enable Onboard LAN controller
2-3 Disable Onboard LAN controller
Default setting
RJ45
3
1
CN_WOL
JLAN
1
3