COMMELL LV-667 - Manual (Page 22)

LV-667 User’s Manual Hardware Setup
Onboard Display Interface 22
2.10 <Onboard Display Interface>
Based on VIA CN400, the board supports integrated S3 Graphics UniChrome Pro IGP
graphics, with BIOS selectable 16/32/64MB shared with system memory for frame buffer.
2.10.1 <Analog VGA Interface>
The board provides a DB15 VGA connector on the rear I/O panel, and one CN_VGA
connector which enable you to connect the VGA interface with MA-ATI (Mini-AGP graphic
card), thus you can have the same display output while applying a graphic card without
additional output connector on chassis.
Connector: CN_VGA
Type: 16-pin (2 x 8) pin header (pitch = 2.0mm)
Pin Description Pin Description
1 Red 2 Green
3 Blue 4 N/C
5 Ground 6 Ground
7 Ground 8 Ground
9 N/C 10 Ground
11 N/C 12 Data
13 HSYNC 14 VSYNC
15 Clock 16 EXCRT
CN_VGA
1
16