Short run/turbo mode, Temperature start mode, Important – Directed Electronics SMARTSTART 5000 User Manual

Page 19

Advertising
background image

15

© 2010 Directed Electronics. All rights reserved.

Important!

Timer Mode should be used only in open areas. Never start

and run the vehicle in an enclosed space such as a garage or carport.

Short Run/Turbo Mode

Short run turbo mode keeps the engine running after arriving at your
destination for a programmable period of 1, 3, 5 or 10 minutes. This
allows the system’s timer to conveniently cool down the turbo after you
have left the vehicle.
To activate:
1. Park the vehicle and set the parking brake.
2. Remove your foot from the brake pedal and leave the engine

running.

3. Press and release the

and

buttons at the same time. The

lights will flash to indicate the remote start has entered short run
turbo mode.

4. Turn off the key, the engine will keep running.
5. Exit and secure the vehicle. The engine will turn off after the pro-

grammed run time.

Temperature Start Mode

Pressing the

,

and

simultaneously activates the Tempera-

ture Start mode. The parking lights flash fast four times to confirm activa-
tion. The engine does not start once activated, it starts when the vehicle
interior temperature drops below 0°F.

Deactivate Temperature Start mode by pressing the same buttons again
or turning the vehicle ignition on. The parking lights flash slowly four
times to confirm deactivation

Advertising