Delta Electronics RTU-DNET - Manual (Page 25)

DeviceNet Remote I/O Communication Module RTU-DNET
DVP-PLC Application Manual 23
(2) Select “Setup” => “Communication Setting” => “System Channel”, and the “Serial Port Setting” dialog box
will appear.
(3) Set up the communication parameters in the PC and DVP-SV, e.g. the communication port, address, baud
rate and communication format.
Item Function Default
COM Port
COM port on the PC to be used to communicate with
DVP-SV
COM1
Address Communication address of DVP-SV 01
Baud rate Communication speed between the PC and DVP-SV 9,600 (bps)
Data Bits 7
Parity Even Parity
Stop Bit
Communication protocol between the PC and DVP-SV
1
Mode Communication mode between the PC and DVP-SV ASCII
(4) Click on “OK” and return to the main page.
(5) Select “Network” => “Online”, and the “Select Communication Channel” dialog box will appear.