Daewoo GB20F8T2 - Manual (Page 20)

16
R E C O R D I N G
c a s s e t t e s
When record time overlaps
Watching programmes while recording (Only 2 Tuners Model)
When setting the Programmable Timer, be careful not to overlap the preset
times.
If you happen to overlap the preset Programs, the END Time has priority and the
overlapped Programmes cannot be recorded.
NOTE :
MAKE SURE THAT …
The clock is adjusted to current time
The safety tab is not missing on the cassette tape.
The tape is long enough to record the desired programme.
* If you program events without setting the time, it will be automatically
returned to “TV TIMER” mode.
If you program events that overlap, at least one of your events will not record
correctly.
If the start time you want to enter does not correspond to the PDC-time or if you
just want to record a part of a programme, you have to switch off PDC. Otherwise
the recorder won’t record.
Just switch over to another
programme using PR/PAGE
/
or the NUMBER BUTTONS.
To check the recording switch to
the recorder (and back) using the
MONITOR/A.TRK button.
19:00 20:00 21:00 22:00
PROGRAMMING
PROGRAMME 1
PROGRAMME 2
PROGRAMME 3
PROGRAMME 1 PROGRAMME 2 PROGRAMME 3 RECORDING
NOT RECORDED
REC
0:00;05
01 ARS
02 KBS
REC
0:02:12
REC PR
02 KBS