CP Electronics EBMPIR + slim line PSU - Manual (Page 4)

page 4
3. Fixing
Surface mount-
ing
Slim-Line Power supply
2. Dimensions cont.
The product is designed to be mounted directly to a luminaire, either on the inside or outside.
the PIR lens must have a view outside the luminaire.
versions with a lux sensor—for optimum operation the lens must shielded as much as possible
from the light source.
If flush mounting in a panel >6mm thick, remove bottom of retention arms with side cutters.
Three mounting options are detailed below:
Ø19.5mm
Ø3.5mm
19mm