DEKPower 36HX - Manual (Page 7)

Rev: 8/2008
7 of 21
36B, 36BX, 36H, 36HX, 52H, 52HX
DEK
®
is exclusively distributed by GXi International, LLC
Heavy Duty Power Equipment
Assembly Instructions
Step 1: Front Wheel Assembly
Note: some mowers may be shipped with the front wheels
pre-assembled.
A) Remove packaging materials surrounding the front
wheels and remove the bolt threaded into the front
wheel. Retain this bolt and washer for future use.
B) Unscrew the fastener holding the bolt to the steel ship-
ping rack. Set the nut and bolt aside. It will be re-used
in the mower assembly process.
C) Remove the mower from the steel shipping rack.
D) Slide the front wheel pivot shaft through the sleeve. If
the fit is tight, apply some grease to the pivot shaft.
E) Secure the shaft in place with the bolt and hardware that
were provided with the wheel.
F) Repeat steps A through E for the second front wheel.
G) Apply grease to the front wheel sleeve grease fittings
when complete.