CUE Wireless IR Control Panels - Manual (Page 17)

User Manual Wireless IR Control Panels
www.cuesystem.com
Page 17 of 26
8. Troubleshooting
1. The Brightness of LEDs is Visibly Decreasing.
• Charge the accumulator immediately.
2. When pressing the button the LEDs are going on and off immediately and then back-light
button flashes several times.
• The accumulator is totally discharged.
• When waking up from the sleep mode it tries to light on the LEDs.
• The increased consumption causes a drop of voltage, which then resets the
microprocessor.
• Charge the accumulator immediately.
3. The IR operating range is short.
• Check the accumulators in the panel and recharge them.
• Change position of the panel or receiver.