Dantax 32LCD V9 - Manual (Page 24)

English - 23 -
PAP
Off
PAP Picture
PAP Source
( PAP ON-OFF
PAP SWAP
PAP ON-OFF
You can activate or deactivate PAP mode by
pressing
 /  button.
PAP Picture
Press  button to enter PAP Picture submenu.
Adjustments of Contrast, Brightness,
Sharpness, Colour, Reset and Store items in
this part are identical with Picture menu in
the Menu System. Refer to Picture menu
explanations in the previous parts.
PAP Source
Select PAP Source item by using  / 
button. Use  /  button to set PAP source.
Note: When main picture source is TV, EXT-1, EXT-
2 or BAV, PIP window can only be set to
HDMI, YPbPr, PC source or vice versa.
PAP SWAP
Select PAP SWAP item by using  / 
button. Use  /  button. This function enables
to swap between the main and the PAP picture.
Note: See Appendix C for all PIP/PAT modes.
Sleep Timer
Press or button to select Sleep Timer.
Use
 /  button to set the Sleep Timer.
The timer can be programmed between Off
and 120 minutes in steps of 10 minutes.
If Sleep Timer is activated, at the end of the
selected time, the TV goes automatically to
standby mode.
Child Lock
Press or button to select Child Lock.
Use  /  button to set the Child Lock On or
Off. When On is selected, the TV can only be
controlled by the remote control handset. In
this case the control panel buttons (except for
the STANDBY button) will not work.
Hence, if one of those buttons is pressed,
“Child Lock On” will be displayed on the
screen when the menu screen is not visible.
Language
Press or button to select Language. Use
 /  button to select the Language.
EXT-2 Out
Use this setting to define Ext-2 signal output.
Press or button to select Ext-2 Out. Use
 /  button to set Ext-2 Out to TV, EXT1, BAV, V,
YPbPr Audio or PC Audio.
Note:
• For copying from a DVD or VCR device, you
should set desired option for EXT-2 output. If
you plug your device to EXT-1, you will copy
the picture that comes from the tuner.
PC Audio In
Select PC Audio In by pressing  /  button.
Using  /  button, you can change the PC
Audio In to TV, EXT-1, EXT-2, BAV, YPbPr Audio
or PC Audio.
Blue Background
If the signal is weak or absent, the TV will
automatically change to a blue screen. To
enable this, set Blue Background to On.
By pressing or button, select Blue
Background. Press  /  button to set Blue
Background as On or Off.
01-ENG-32761W-1055 UK-32 INCH-17MB12-(1 HDMI-3D PAN-BASIC PIP-WO SVHS)-50133726.p65 04.09.2008, 08:27 23