Dataman 770 Series - Manual (Page 6)

Development kit for DATAMAN 770 series
Programmer’s Guide
1. Basic information
1.1. Development kit contents
All development kit (DK) parts are located in the installation directory.
Directory Contents
Examples\C#.NET C#.NET example
Examples\VB.NET Visual Basic .NET example
Examples\VB Visual Basic 6.0 example
Examples\Delphi Delphi example
Examples\CBuilder C++ Builder example
Examples\VC Visual C++ example
Include\C#.NET C#.NET header files
Include\VB.NET Visual Basic .NET header files
Include\VB Visual Basic 6.0 header files
Include\Delphi Delphi header files
Include\CBuilder C++ Builder header files
Include\VC Visual C++ 6.0 header files
Bin M770drvdk.dll and m770drv.dll libraries
Table 1.1. –Development kit (DK) contents
1.2. DK usage
In order to make the DK work properly, it is necessary to have the DATAMAN 770
oscilloscope drivers installed. The m770drv.h header file contains all DK functions
and m770drv.lib contains association of these functions with external DLL. Add both
files to project to gain access to DK functions. The m770drvdk.dll and m770drv.dll
must be present in the project directory.
1.3. Application deployment
The m770drvdk.dll and m770drv.dll libraries must be distributed together with your
application. The drivers for the DATAMAN 770 oscilloscope must be installed in the
system in order to communicate with the device. The application will work with every
device with an activated DK.
- 6 -