Datapath x4 - Manual (Page 6)

Unpacking
Your packing box should contain the following items:
• The x4 or x4-1U Display Wall Controller
• The x4-PSU Power supply unit with international blades Only the power supply unit provided
should be used (x4 only)
• 1 x Mains power cable (x4-1U only)
• USB 2.0 cable Type A to Type B.
• Datapath CD containing Configuration Application and User Manual.
Note:
We recommend that you do not discard the packing box until you are completely satisfied with
the x4 and it is fully installed and working correctly. We also recommend that you make note of
the serial number of the controller in a prominent place before you connect it to the
computer. This should hasten any query should you need to contact our Technical Support De-
partment. The serial number is displayed on the x4 and the box label.
Fitting the x4 PSU Blades
Select the appropriate blade for use, place the top edge of the blade into the recess of the PSU and then
slide upwards ensuring the release catch clicks firmly into place and secures the blade inside the recess.
To remove the blade, press the release catch down fully and pull the blade away from the PSU recess.
The PSU is shipped fitted with the UK blade.
9
Crop the input signal into x4 and display x2 quarters landscape and x2 quarters portrait.
Crop the input signal x4 rotate through 90º,180º or 270º, display in landscape and portrait. Arbitrary crop
regions can allow the monitors to be artistically arranged, but maintain an undistorted image.
8