DekTec DTC-300 StreamXpress - Manual (Page 68)

DTC-300-SP – StreamXpress
USER MANUAL
68
5. Using the StreamXpress with DTE-3100 product.
The DTE-3100 is a networked ASI output. The DTE-3100 offers 2 modes:
-SMPTE where a TSoIP stream can be converted to an ASI output
-DTAPI mode where the DTE-3100 can be connected to the StreamXpress for remotely over the
network streaming ASI streams.
In order to use the StreamXpress with the DTE-3100, the DTE-3100 needs to be licensed for
StreamXpress. The StreamXpress will connect to the DTE and stream over IP the open MPEG-2 TS file
to the DTE-3100. The DTE-3100 will output ASI. This mode can be used to remotely stream a stored
file to ASI.
To stream to the DTE-3100, the StreamXpress must be started from the DOS command prompt with
the –DTE option (See section 4).
The DTE must be in the API mode to operate from the StreamXpress.