Draytek Vigor 2800 - Manual (Page 16)

10
2. Quick Install Your Vigor2800 Series Router
2.1 Hardware Installation
Before starting to configure the router, you have to connect your devices
correctly.
1. Connect the DSL interface to the external ADSL splitter with an ADSL line
cable.
2. Connect one port of 4-port switch to your computer with a RJ-45 cable.
3. For G models, connect detachable antennas to the router.
4. Connect the attached power adapter to the power port.
5. Check the ACT and WAN, LAN LEDs to assure network connections.
(Regarding the detailed LED status explanation, please refer to section 1.3)