Future Automation AL675 - Manual (Page 10)

In
st
al
la
ti
o
n
:
S
ta
ge
5
Page 9 of 18 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
AL675 UDC1 Actuator Lift
Mounting the screen
-Place the screen uprights into
position on the back of the
screen
-Secure into place using the
range of nuts, bolts and washers
provided
-Once the screen uprights
are attached, overlap the
screen to the horizontal bars
the same way as they were
taken off
-Tighten x4 bolts back up to
lock the screen into position
as shown in the detail view
-Make sure the screen is
centralized in the middle of
the mechanism