Desa TD100 - Manual (Page 4)

www.desatech.com 118994-01G 4
SAFETy INFORMATION
Continued
Clothing or other flammable mate-
rials should not be hung from the
heater or placed on or near heater.
Installation and repair should be
done by a qualified service per-
son. Heater should be inspected
before use and at least annually by
a qualified service person. More
frequent cleaning may be required
as necessary. It is imperative that
control compartments, burners, and
circulating air passageways of the
heater be kept clean.
CAUTION: The gas pressure
regulator provided with this
appliance must be used. This
regulator is set for an output
pressure of 28" W.C. (1 P.S.I.).
. If replacement is required, use only
regulator with same setting. See Parts
List page 13.
3. Use correct pressure specifications, see
page 9.
4. Propane/LP gas cylinder is not provided.
Use a 0 lb. propane/LP gas cylinder
marked propane. The cylinder supply
system must be arranged for vapor with-
drawal. The cylinder used must include
a collar to protect the cylinder valve. The
cylinder must be provided with a shutoff
valve terminating in a propane/LP gas
supply cylinder valve outlet specified, as
applicable, for connection no. 600 in the
Compressed Gas Association’s Limited
Standard Cylinder Valve Outlet Connec-
tion for Propane Small Valve Series.
PROdUCT
IdENTIFICATION
Figure 2 - Outdoor Patio Heater with Light
Gas Light
(Inside Deco
Shroud)
Burner
(Behind Grill)
Electronic
Ignitor
Cabinet
Base
Assembly
Control
Knob
On/Off
Switch
UNPACkING HEATER
Check all items for shipping damage. If heater
is damaged, promptly inform dealer where you
bought heater.
1. Remove base and weight from box.
. Remove top cap,  deco light shrouds,
top and packaging materials from box.
Set parts aside in a safe location.
3. Remove burner assembly from box, leav-
ing packaging materials on bottom of as-
sembly. Set aside in the upright position.
4. Remove lightpost pieces, cabinet base
and tank door from box. Set aside.