Future Automation LSM-S-BE - Manual (Page 17)

  SLQV
Contact Closure
- Use an RJ45 connector in the CCI
socket on the control box to operate
via contact closure
LED 1
LED 2
LED 3
LED 4
LED 5
CONTACT CLOSURE
INPUT
Any contact closure input whilst
the mechanism is in motion will
stop the movement and all other
contact closure commands will
be disabled for 1 second.
568A 568B
1 12V SUPPLY 12V SUPPLY - CURRENT LIMITED W/G W/O
2 PIN 2 NOT USED G O
3 GROUND GROUND W/O W/G
4 PIN 4 NOT USED BL BL
5 DEVICE LEFT
Momentary short to GROUND (pin 3), will
make device go LEFT.
W/BL W/BL LED 4
6 DEVICE RIGHT
Momentary short to GROUND (pin 3), will
make device go RIGHT.
O G LED 3
7 DEVICE HOME
Momentary short to GROUND (pin 3),
makes device go OUT / HOME.
W/BR W/BR LED 2
8 DEVICE IN
Momentary short to GROUND (pin 3),
makes device go IN.
BR BR LED 1
PIN DESCRIPTION ACTION
WIRE / CABLE CONTACT CLOSURE
LED INDICATOR
In
st
all
at
io
n
: C
on
ta
ct
C
lo
su
re
Page 16 of 20 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
LSM S BE - Lift System Medium Swivel Box Enclosure