Future Automation DA - Manual (Page 7)

Vertical height alignment
Firstly place the screen down onto a flat surface with the back penel facing up
making sure that the screen does not get damaged in any away time.
When flat place the uprights down into position and carefully bolt to the screen.
In
st
all
at
io
n
: S
ta
ge
2
Page 6 of 12 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
DA - Double Arm Bracket
Non-Scratch Flat Surface
Make sure to measure the distance of the uprights so they are an equal distance from
the top of the screen and will be in the correct height position when mounted to the wall.