Future Automation SAC-U1 - Manual (Page 6)

In
st
al
la
ti
o
n
:
S
ta
ge
1
Page 5 of 12 // email [email protected] tel: +44 (0) 1438 833577 fax: +44 (0) 1438 833565
SAC-U1- Smart Airflow Control Unit 1
Mounting the SAC Unit
Measure where you want the SAC unit
to be mounted and cut a void in the
cabinet with the dimensions shown.
Mount the SAC-U1 over the screw head using the
key hole slot. Make sure the unit is square and
then fix in place using the other six mount holes.


 


 


 
Fix a screw into the cabinet 10mm
[0.4”] above the top edge in the
centre as shown. Leave some of
the screw out from the surface as
shown in the detailed view.
10 [0.4]
230 [9.0]
115 [4.5]
11
5
[4
.5
]