Installation, Mounting, Orientation – ILUMINARC Ilumiline™ 21g2 IP User Manual
Page 10: Procedure
Installation
6
Ilumiline 21g2 IP Optic WW User Manual Rev. 2
3. Installation
Make sure to mount
this product away
from any flammable
material as indicated in the
Mounting
Before mounting this product, read and follow the safety recommendations indicated in the
Orientation
Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance.
Installation
The Ilumiline 21g2 IP Optic WW comes with two adjustable brackets with 3-mm slot openings to
mount the product on any firm, non-flammable surface. Once mounted, the product’s angle can
be adjusted and locked. ILUMINARC® recommends following the general guidelines below
when mounting the Ilumiline 21g2 IP Optic WW.
· When selecting an installation location, consider ease of access for operation,
programming adjustments, and routine maintenance.
· Make sure the product’s mounting location can support its weight. Please see the
section of this manual for the weight-bearing requirements of
this product.
Procedure
The Ilumiline 21g2 IP Optic WW comes with two adjustable brackets with 3-mm slot openings to
mount the product on any firm, non-flammable surface. These feet also serve as floor or wall
mount supports. You will have to use two mounting points per product.