ILUMINARC Ilumipod™ Inground Tri-12 IP - Manual (Page 8)

Ilumipod Inground Tri-12 IP
8
Settings The Ilumipod Inground Tri-12 IP uses the Ilumicode unit for configuration
purposes.
Ilumicode
Connection
The diagram below shows how to connect the Ilumicode to this product.
Note that this connection will control multiple fixtures at the same time,
all having the same DMX address. To assign individual DMX addresses to
each fixture, you must connect the Ilumicode unit to each fixture,
individually.
Ilumicode
Connection
Diagram
ILUMINARC® suggests you to connect no more than 20 fixtures in this
mode and to keep the total distance to less than 60 m (197 ft). Otherwise,
you might need to use an optically isolated signal amplifier.
Ilumicode
Description
Button Function
<MENU> Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases the
numeric value when in a function