Joemeek oneQ2 Master Channel - Manual (Page 7)

x1
x2
44.1k
48k
DIGITAL INTERFACE
MIC INPUT LINE INPUT INSERT AES/EBU
OUTPUT
OPTICAL
OUTPUT
SAMPLE
FREQUENCY
CHANNEL 2
ANALOG INPUT
WORD CLOCK
INPUT OUTPUT
+4dBu OUTPUT OUTPUT COMP LINK
CHANNEL 1
CAUTION
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
ENSURE MAINS VOLTAGE AND FUSE RATINGS
ARE CORRECT BEFORE CONNECTING MAINS POWER.
THIS APPARATUS MUST BE EARTHED BY THE POWER CORD.
NO USER SERVICEABLE PARTS -
REFER SERVICING TO QUALIFIED PERSONNEL.
oneQ 2
MASTER STUDIO CHANNEL
www.joemeek.com
MADE IN CHINA
DESIGNED IN THE UK FOR PMI AUDIO
EN55103
EN60065
AC POWER ONLY
VOLTAGE: 115/230 V~
FREQUENCY: 50/60 Hz
POWER: 20 VA
CAUTION
ENSURE CORRECT RATINGS
WHEN REPLACING FUSES.
FUSE RATINGS:
220-240V~: T250L
100-120V~: T500L
-10dBV
+4dBu
SLAVE
MASTER
SPDIF
OUTPUT
J O E M E E K
COMPressor LINK - allows the Compressors of a pair of oneQ 2 s
to be linked for stereo operation, using 1/4" jack to jack cable.
COMPressor LINK switch - selects which of the pair of oneQ 2 s'
Compressor controls are active in stereo link mode: out for
Master, in for Slave.
+4dBu/-10dBv switch - selects the operating level of the 1/4"
jack output, either to the professional standard of +4dBu, or to
-10dBv which may be more suitable for hi-fi amplifiers and some
computer sound cards.
DIGITAL INTERFACE - outputs two channel digital audio in
S/PDIF format (optical and RCA phono connectors) and AES3
(XLR connector).
WORD CLOCK INPUT - BNC connector allows the oneQ 2 to be
synchronized to an external word clock.
WORD CLOCK OUTPUT - BNC connector allows external digital
equipment to be synchronized to the oneQ
2 's internal word clock.
Sample Rate switches - select 44.1kHz, 48kHz, 88.2kHz or
96kHz.
Channel 2 Analog Input - allows an external balanced analogue
audio signal to be fed to (the otherwise unused) digital channel 2.
Rear Panel at a Glance
7