Cardioid arrays with nomos ls, Setup instructions for a cardioid array, 2 cardioid�arrays�with�nomos�ls – KLING & FREITAG K&F NOMOS LS User Manual

Page 15: 1 setup�instructions�for�a�cardioid�array

Advertising
background image

User's manual

K&F NOMOS LS

KLING & FREITAG GMBH © 2011

Revision 4.0

Page 15 of 21

6.2

Cardioid�Arrays�with�NOMOS�LS

The subwoofer NOMOS LS is designed so that it can be used as a cardioid system in an array of three
subwoofers, or in multiples of three.

A cardioid array results in an increase of sound pressure towards the front because of the rear-facing
subwoofer. In the rear area, on the other hand, the sound pressure is clearly reduced.

With this, you achieve

less unwanted sound on the stage

low feedback

simplified miking

improved room acoustics with fewer reflections from the rear and side walls, or – when flown –
from the ceiling

simplified adherence of sound emission limits and therefore less noise disturbance for nearby
residential areas during open air events.

6.2.1

Setup�instructions�for�a�cardioid�array

To achieve a cardioid pattern, you must always have an array with 3 subwoofers - or a multiple of 3
subwoofers - setup next to one another (3, 6, 9, etc.). In this set of three, the middle one must be
rear-facing while both other subwoofers are front-facing.

You can choose from the following options for cardioid and hypercardioid setups:

3 x NOMOS LS horizontal

3 x NOMOS LS vertical

3 x NOMOS LS horizontal stacked

3 x NOMOS LS vertical stacked

Advertising