Knox Video R & T Cat - Manual (Page 9)

General
Temperature:
Operating:
32F to 113F (0C to 45C)
Storage: -4F to +140F (-20C to +60C)
Humidity: 10% to 90% non-condensing
MTBF: 20,000 hours
Shipping Weight: 4 pounds
Compliance: FCC Class A, CE Emissions, Health and Safety and RoHS
Power:
Input:
100 VAC to 240 VAC, 50/60 Hz, Non-Grounded, wall
transformers
TCAT
12 VDC, 0.120 Amp
RCAT 12 VDC, 0.175 Amp
Power Supply Input Plug 2.1mm, Center Positive
Dimensions: 5.75” wide by 1.5” high by 2.25” deep
SECTION 2. INSTALLATION
2.1 INTRODUCTION
This section provides the information required for installation of the CAT Video Distribution
System into its operating environment.
2.2 UNPACKING AND INSPECTION
Unpack the CAT Video Distribution System carefully and verify that the serial number matches
the number quoted on the packing list. Before installing it into a system, check the outside of the
unit carefully for signs of damage and check that none of the fasteners has come loose.
2.3 INSTALLATION
The CAT Video Distribution System has two mounting configurations available. There is a multi
unit rack mounting bracket and a single unit wall bracket. Which one you use will depend on the
location. Choose a space, which is convenient for all the cables to converge. Then make all
Audio and Video connections prior to connecting the DC power plug.