Oxmoor RMX-44 - Manual

Oxmoor Corporation, LLC, 309 Cahaba Valley Parkway, Birmingham, AL 35124 USA Toll Free: 1-800-262-6898
Phone: 205-982-8200 Fax: 205-982-8250 E-mail: [email protected] Internet: www.oxmoor.com
INPUT 1 3
2 1
3
S A
OUTPUT A
3
2 1
S B
OUTPUT B
INPUT 2 3
INPUT 3 3
INPUT 4 3
INPUT 5 3
INPUT 6 3
CONTROL PORT
2 1
2 1
2 1
2 1
2 1
2 1
Rear-panel, electronically bal-
anced inputs and outputs use re-
liable XLR connectors. The RMX-
44T and the RMX-62T provide
output isolation transformers.
While the nominal input signal
level range is -10 to +8 dBu, the
units are capable of handling +24
dBu signal levels. Each output can
be unbalanced independently
using internal jumpers.
A rear-panel, 25-pin Control Port
provides individual access to
each of the input/output matrix
assignment crosspoints. All that
is required to route any input to a
chosen output is a switch closure.
Like all Oxmoor products, the
RMX-44 and RMX-62 are built for
enhanced reliability. The bottom
line is simple: both the RMX-44
and RMX-62 pack a great deal of
operational flexibility into a small
amount of space.
For more information on any Oxmoor
product, please contact the Oxmoor
Sales Department. Or download com-
plete product brochures and manuals
at our website: www.oxmoor.com.
RMX-44/RMX-44T & RMX-62/RMX-62T
MIXING MATRIX SYSTEMS
The Oxmoor RMX-44™ and
RMX-62™ Mixing Matrix Systems
offer a unique, high-quality solu-
tion for many audio routing and
combining applications.
For enhanced flexibility, all in-
put/output assignments can be
controlled remotely via switch clo-
sures. Now you can alter and
modify signal routing within a
complex sound system from a cen-
tral location.
Configured as a 1U rack-mount
device, the RMX-44 is a four-in-
put/four-output combination sig-
nal buffer, mixer and distribution
amplifier. All inputs can be indi-
vidually adjusted in level, and
combined together to feed any or
all outputs. The RMX-62 is virtu-
ally identical to the RMX-44 ex-
cept that it offers six inputs and
two outputs.
Potential applications include
combining four or six inputs for
zone mixing, and providing
simultaneous stereo and mono
feeds from different input assign-
ments.
High and low input/output lev-
els can also be freely intermixed,
allowing semi-pro and profes-
sional equipment to be used in a
sound system without additional
interface units.
Front-panel controls are simple-
to-use Input gain trim pots, with
±
15 dB adjustment.
Oxmoor's RMX-44 Mixing Matrix
Oxmoor's RMX-62 Mixing Matrix
INPUT 1 3
INPUT 2 3
INPUT 3 3
INPUT 4 3
2 1
3
S A
OUTPUT A
3
S B
OUTPUT B
3
S C
OUTPUT C
3
S D
OUTPUT D
CONTROL PORT
2 1
2 1
2 1
2 1
2 1
2 1
2 1