Paxton Superchargers Dodge V-10 Truck User Manual
Page 12
Advertising
2-6
P/N: 4800019
©2003 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
25SEP03 v2.0 Dodge V-10(4800019v2.0)
Fig 2-t
Fig 2-u
Fig 2-v
J.
Install the 45º brass elbow into the water
pump and tighten with a 13/16” wrench.
Use Teflon tape and position as shown.
(See Fig. 2-t.)
L.
Reinstall the A/C bracket using the stock
bolts. When resecuring the rod to the top
of the compressor, secure the two
ground wires previously secured to the
power steering pump bracket. Install the
wires between the rod and the compres-
sor. (See Fig. 2-v.)
K.
Install the brass nipple into the fitting
installed in step 2-t with Teflon tape and
tighten with a 5/8” wrench. (See Fig.
2-u and Appendix M.)
Advertising