Presentation Switchers PS510 - Manual (Page 17)

Page 17 Series 500 Installation Guide
Connecting to the Switcher Connecting to the Switcher
Connect from a PC to the switcher using a RS-232 straight serial cable. A null-modum cable will
not work.
Setting Communication Baud Rates Setting Communication Baud Rates
Using the Communica ons pull down menu, set the baud rate to the speed of the switcher. The
switcher defaults to 115,200 baud.
Entering Display Codes Entering Display Codes
Hexidecimal or Text Hexidecimal or Text
Display codes can be entered on the main form using hexidecimal numbers or text (ASCII) char-
acters. One can transi on between text and hexidecimal by checking or unchecking the “Display
/ Enter commands in hex” checkbox. Text already entered will be converted to hex and vice
versa as one check and unchecks the box.