Q-See QSTD2408 - Manual (Page 29)

QSTD2400 Series DVR User’s Manual
Fig 3.25 PTZ Setup
STEP2
Set protocol, baud rate, address according to the parameters of
the speed dome.
STEP3
Click Set button at right of Preset. Here users can setup presets
(see Fig 3.26 Set Presets), and adjust the speed dome. Select a preset and
click Save to a preset. Users can set up to128 presets.
Fig 3.26 Set Presets
STEP4
Click Set button at right of Cruise. Here users can set cruise track,
as Fig 3.27 Set Cruise. Choose the preset, set stay time of every preset.
Click + button to add the preset to the left preset for cruise track.
Fig 3.27 Set Cruise
STEP5
Select a preset in left preset list, click – button to delete the preset.
25