Mobile surveillance, Accessing by phones with wince, Click on the software name. a dialog box pops up – Q-See QSTD2408 User Manual
Page 59: Click “yes” to download and install, Chapter 7, 1 accessing by phones with wince, Chapter 7 mobile surveillance
QSTD2400 Series DVR User’s Manual
CHAPTER 7 Mobile
Surveillance
This DVR supports mobile surveillance by PDA or smart phones with WinCE
and Symbian OS running on 3G networks. We tested Dopod D600 (WM5) and
Dopod S1(WM6), which work fine with the DVR.
To setup mobile surveillance, you first need to enable network service on the
DVR, refer to 4.2.7 Network Configuration. Below are the instructions for using
on mobile client end for the two Operating Systems.
Notice: It only supports live view by mobile devices on one channel at a time.
7.1 Accessing by Phones with WinCE
Please use PDAs or smart phones with WinCE versions supported by this unit
(WM5 & WM6).
STEP1
First, activate the network access on the mobile phone, and then run
“Internet Explorer”.
STEP2
Input the DVR server’s address and the connection is made as shown
below:
STEP3
Click on the software name. A dialog box pops up.
STEP4
Click “Yes” to download and install.
55