SMK-Link Electronics RemotePoint Wireless Navigator Suite - Manual (Page 4)

Page 5 Page 6
Wake up from sleep mode
• Please note that this keyboard is designed with a sleep mode
to conserve battery power. After 10 minutes of non-oper-
ation, the keyboard goes to sleep mode. To wake up from
sleep mode press and release the green Fn (function) key then
resume typing or using the trackball.
Installing Rechargeable Batteries
• Remove the battery cover located at the
bottom of the keyboard. (See Fig. 3)
LED status indicator light (see Figure 2):
Charging Status Indicator: LED flashes
during charging. LED turns solid
when keyboard is fully charged.
Battery-Low Indicator: LED turns on
when battery power is near empty; LED
turns off when batteries are recharged.
Note: indicator does not function
when keyboard is in sleep mode.
RF Status Indicator: LED turns on
when keyboard is successfully paired
to the receiver dongle and flashes 3
times when RF transmission fails.
Figure 2
Battery Compartment
Figure 3