Tempest Tornado - Manual (Page 43)

Tornado Enclosure User Manual page 43
Securing the Globe to the Tornado Enclosure Base
1. Using two people, lift the globe assembly in place.
2. As soon as the globe assembly is in place, secure the four latches, and insert padlocks in the
locking rings, if required, for additional security.
3. IMPORTANT: The latch tension is adjustable, and has been set in the factory to assure a
secure and weathertight seal. Check to make sure the tension is maintained.
4. Security – use a caribiner or a padlock (not supplied) for additional security if desired.
Congratulations! Your system is now ready to check out.
Latch properly secured, with a
caribiner in place.
Use a padlock for greater security
if preferred.
Tension adjustment screw and
locknut.
Check periodically to maintain a
tight seal.
