Thrustmaster Force Feedback Racing wheel - Manual (Page 5)

Thrustmaster Force Feedback Racing Wheel – User Manual 5
Be careful not to
overtighten the clamps before
locking in order to avoid damaging
either the clamps or the table.
III. WHEEL FIXATION
Place the Thrustmaster Force Feedback Racing Wheel on a table or flat surface. Set
the locking device on the front of the wheel to the UNLOCK position. Tighten the
clamp screws on the underside of the table until the wheel is firmly fixed into place
and then secure it by setting the locking device to the LOCK position. Connect the
pedals to the wheel using the pedal cable provided. You are now ready to install your
drivers and software.