Thuraya SatSleeve for Android - Manual (Page 8)

User Guide | ENGLISH
8
Turning On the Thuraya SatSleeve
Press and hold the power button down for about 2
seconds to power on the Thuraya SatSleeve. The
blue LEDs will blink and you will hear a beeping
sound. The Thuraya SatSleeve is now ready to pair
with your smartphone.
To turn off the SatSleeve, press and hold the power
button down for about 2 seconds until all of the red
/('VDUHÀDVKLQJDQG\RXKHDUDEHHSLQJVRXQG
How to use the SatSleeve
To enable satellite mode on your smartphone,
you will need to pair it with the Thuraya SatSleeve
via Bluetooth. Follow the below steps to pair the
devices:
1 On your Samsung Galaxy go to Settings >
Bluetooth > On to activate Bluetooth
2 Select e.g. SAT0000000 from the ‘Available
devices’ list.
3 Select OK on the Bluetooth pairing request.
4 Open the SatSleeve application.
5 Select e.g. SAT0000000 from the list to connect
the SatSleeve with your Samsung Galaxy.