Transystem mobileMate 886 - Manual (Page 7)

Ver 1.3 6
Chapter 2 Getting started
Please follow the procedure step by step.
Step 1 Charging Your Battery
For the 1
st
time you use the 886, please charge battery until it is full (no
LED light display). Take the power cable and connect it to the power jack
(mini USB type). This will begin to charge the battery. The LED that
represents the battery is the green light battery icon (shown in below).
- If the LED is red, that means battery power is critically low. Charge immediately.
- If the LED is green, that means battery is charging now.
- If the LED is blinking, that means battery is fully charged.
- When you plug into the mini USB cable to charge your unit, it will takes 1~2
seconds then you can see the green LED is on.