Transystem photoMate 887 - Manual (Page 14)

14
4. Connect to Serial Port Profile (SPP) Slave
-->
Tap and Hold 887: SPP slave,
Connect Done
5. Finish Bluetooth Manager Setup
Step 4 Loading your GPS mapping or routing software
You should have mapping software on your PDA/ Smartphone/ laptop or
you need to install it before using the 887 for navigation.
Step 5 Starting the application
Select the correct COM port & baud rate within the application.
Note: The Bluetooth device in most of the applications has an
“auto-detect” feature so that you do not need to select the Baud Rate.