TVLogic LUM-300W - Manual (Page 14)

26 4K LCD Monitor 4K LCD Monitor 27
6. Button Functions
3) UD MODE(1CH) : This mode displays 1
input signals (A or B(HDMI)) to 4K(4096 X
2160 or 3840 X 2160) image.
4) 2-SAMPLE INT(4CH) : This mode displays 4
input signals (A,B,C,D(SDI))to 4K(4096 X 2160
or 3840 X 2160) image.
5) 2-SAMPLE INT(2CH) : This mode displays
2 input signals (A,B(SDI))to 4K(4096 X 2160 or
3840 X 2160) image.
* The 2-SAMPLE INTERLEAVE mode displays the
whole image with one input signal while the
existing 4K signal which input with 4channels
displays ¼ image with one input signal.
●
F1(MODE) settings are as followed.
1. Press the F1/MODE button on the front of
the monitor to change the MODE.
- SDI : UD MODE(4CH), 2-SAMPLE INT(4CH),
2-SAMPLE INT(2CH)
- HDMI: UD MODE(1CH), UD MODE(4CH)
- DP : UD MODE(1CH), UD MODE(2CH)
(To be supported.)
2. UD MODE
- This mode displays 1,2 or 4 input signals to
4K(4096 X 2160 or 3840 X 2160) image.
1) UD MODE(4CH) : This mode displays 4
input signals (A,B,C,D(SDI, HDMI))to 4K(4096
X 2160 or 3840 X 2160) image.
2) UD MODE(2CH) : This mode displays 2 input
signals (A,B (DP)) to 4K(4096 X 2160 or 3840 X
2160) image.
[1] F1(MODE) Button
6. Button Functions
1.Two different aspect modes are available.
* Aspect on
- Fit to 4096x2160 display when input signal
ratio is 16:9
* Aspect off
- Fit to 3840x2160 display when input signal
ratio is 16:9
- Fit to 4096x2160 display without altering the
image when input signal is DCI(4096x2160)
- Fit to input signal ratio when input signal is
not 16:9
[3] ASPECT
●
SCAN Button (APPLY AFTER F2~F5 KEY
MAPPING)
●
This product supports various scan modes.
●
Press the [SCAN] button on the front of the
monitor to activate different scan modes.
Key mapping can be set in the OSD menu.
1. Press the [SCAN] button continuously to
activate various scan modes.
-ZERO SCAN -> 1:1 SCAN
2. The following represents the different types
of scan mode. When a scan mode is selected,
display skips the next mode if its required
condition is not met.
- ZERO SCAN : Zooms in/out of the image
without changing the aspect ratio.
- 1:1 SCAN : 1:1 pixel mapping of the original
image. This feature is available only when
the size of the original image is bigger than
the screen size.
[2] SCAN Button
A
A
A 1st
A
A
B
B
A 2nd
B
D
D
B 2nd
C
C
B 1st