Vectronics DL-2500 - Manual

DL-2500 High Power Dummy Load Owner's Manual
1
VECTRONICS
DL-2500 High Power Dummy Load
VECTRONICS' Dry Fan Cooled Dummy Load simulates an accurate 50 Ohm antenna up
to 54 MHz, enabling you to test your transmitter without radiating a signal on the air.
•
DC to 54 MHz.
•
Simulates a matched 50 Ohm antenna to test your transmitter.
•
Handles short-term RF power up to 2500 watts
•
VSWR of less than 1.3:1 at 30 MHz.
•
Power Dissipation: 2500 watts average - up to 1 minute maximum.
Fan must be used at high power levels.
•
Duty Cycle: 10% with fan.
•
Voltage Gradient: 10 kV per inch.
•
Resistor Type: Dispersed carbon particles fired in a ceramic matrix.
•
Energy Density: 7000 J / inch3 / second.
•
Compact and lightweight.