Vibiemme Lollo User Manual
Page 8
Advertising
8
3.2. Connect to power supply
The electrical feeding must be done through an automatic switch, suitable to the power of the machine
(see the identification plate on the machine) and provided with thermic protection and fuses (this
installation work must be carried out by skilled personnel only). Before connecting electrical supply be
sure that AC mains and machine voltage are corresponding.
If these standards are not followed VIBIEMME will not be held responsible for damages
to things and/or persons.
Connect the power cable to the previously installed main switch following the drawing below:
Advertising
This manual is related to the following products: